IRIG-106 PCM decoder/merger module
Merges several IRIG-106 PCM streams into one — the traffic controller of your telemetry.
- Family code
- MERG
- Variants
- 2
- Power per module
- 3.5 W
- Record & replay
- Not offered
What it acquires
Two IRIG-106 PCM streams, decommutated and merged into a single stream that the NanoX controller records or transmits. It runs asynchronously with third-party PCM encoders.
Typical uses
- Merging PCM streams
- Third-party PCM encoders
Key specifications
- Bit rate
- Up to 20 Mbit/s NRZ-L, 8 Mbit/s bi-phase-L
- Minor frame
- Up to 4k 16-bit words
- Words
- 4 to 16 bits, parity programmable per word
- Levels
- TTL and RS-422
Values from the module datasheet. Pinouts, drawings and full specifications: on request. Request the datasheet →
VARIANTS & PART NUMBERS
One reference per module
As the NanoX configurator composes them.
| Variant | Part number |
|---|---|
| 2 channels | MERG-2-NX |
- Each module takes one of the NanoX's sixteen slots.
- Power per module: datasheet value, for the most demanding variant.
GO FURTHER
The articles that explain
PCM telemetry: frames, sync and link budget
How several hundred sensors end up as a single serial bit stream, how a ground station finds its way back into that stream, and how far it will actually reach — the practical mechanics of PCM/TDM telemetry.
Standards & formatsIRIG 106 Chapter 4: what the PCM telemetry standard actually requires
Chapter 4 is the oldest working part of IRIG 106, and still the one every telemetry range implements: the rules of a PCM stream, from the bit code to the frame. Most of it fits on a page. The part that matters most is the line between Class I, which every range accepts, and Class II, which the range must agree to first.
RELATED MODULES
In the same NanoX
The full datasheet, on request
Pinouts, connectors, drawings and full specifications: tell us which module, and our team sends the datasheet.
Request the datasheet →