D.T.MUX Ground Station
A scalable telemetry receiver and recorder/reproducer that captures every channel while streaming and replaying analog and digital data in real time.
A recorder/reproducer that simultaneously records all channels while providing real-time monitoring and playback of analog and digital data, via decom software or physical outputs. Built on D.T.MUX NanoX modules (up to 16 via a rear backplane), it is fully scalable and works with ETEP's D.T.MUX Viewer or any IRIG 106 Chapter 10 post-processing software.
The D.T.MUX Ground Station is a bench and control-room system that unifies telemetry reception, high-speed multi-channel recording, live monitoring and replay in a single rack unit. It records all channels simultaneously while feeding real-time views and physical outputs, so test engineers can watch data as it arrives and reproduce it immediately for analysis.
Its acquisition and restitution modules are the same D.T.MUX NanoX modules used in airborne units, with up to 16 modules fitted through a rear backplane receiver. This shared modularity lets a ground station mirror the exact channel configuration flown onboard, and an optional distribution panel provides convenient BNC or laboratory connections for lab integration.
- Telemetry receiver & acquisition system
- High-speed simultaneous recording of all channels
- RAID storage up to 32 TB
- Real-time viewing, reproducing, replay & post-processing
- Built on D.T.MUX NanoX modules (up to 16)
- Windows 11 Pro · D.T.MUX Viewer software
- GPS / IRIG-B / PTP v2 time sync · IRIG 106 Ch.10 / D.T.MUX
- Patch panels: BNC / RCA / SMA, integrated or external 19″
- Telemetry receiver and acquisition in one integrated unit
- High-speed simultaneous recording of all channels to RAID storage (up to 32 TB)
- Real-time data viewing during acquisition
- Real-time data reproduction via decom software or physical outputs
- Data replay and post-processing on the integrated Windows 11 Pro platform
- GPS, IRIG-B or PTP v2 time synchronisation
- Fully flexible and scalable through backplane-mounted modules
- Patch panels — integrated rear or external 19-inch — with BNC / RCA / SMA connections
- Works with ETEP's D.T.MUX Viewer or any IRIG 106 Chapter 10 post-processing software
Built on D.T.MUX NanoX modules
The Ground Station's acquisition and restitution channels are built on the same D.T.MUX NanoX modules used in airborne recorders, with up to 16 modules installed via a rear backplane receiver. Because ground and airborne units share the module family, the station can replicate the flown configuration for consistent recording, monitoring and playback. Recordings are made in IRIG 106 Chapter 10 or D.T.MUX format, ready for ETEP's D.T.MUX Viewer or any Chapter 10 post-processing tool.
Bench & control-room installation
A 7U 19-inch rack unit of ≈18 kg, powered from 100-240 V AC (50/60 Hz, ≈350 W) with active-fan cooling: the Ground Station operates from -15 °C to +55 °C (storage -20 °C to +85 °C) up to 15,000 ft, withstands 0.22 g RMS vibration (1-50 Hz) and 20 g / 11 ms shocks, and carries a computed MTBF above 50,000 hours. I/O uses MIL-DTL-83513 connectors or the BNC / RCA / SMA patch panels.
D.T.MUX NanoX
High-speed 1 Gbps acquisition / recording / replay / transmit.
View product
D.T.MUX NanoS2
Ultra-compact flight-test recorder, stackable modules, up to 2 TB.
View product
D.T.MUX COD-R
Ultra-miniature DAQ, up to 128 channels, low-latency real-time TX.
View product