D.T.MUX NanoX

Applications Flight testGround telemetryGround testingOnboard video

The most advanced high-speed (1 Gbps) acquisition, recording, replay and transmitting system for airborne applications and ground tests — in an ultra-compact, ultra-flexible design.

D.T.MUX NanoX
0 Gbps
Recording & transmit
0
Stackable modules
0 TB
Onboard capacity
0 °C
Operating environment
Telemetry & Data Acquisition

The NanoX is an efficient, ultra-compact data concentrator and recorder: up to sixteen stackable acquisition modules, integrated CPU/controller and optional recording (64 GB–2 TB) in a single device. It delivers high-speed (1 Gbps) recording and transmitting in one unit where other solutions need two or three — with real-time streaming in D.T.MUX, IRIG 106 Chapter 10 or IENA formats.

Built around a CPU / controller module with optional recording (64 GB–2 TB) and a dedicated power-supply module, the NanoX lets you plug and stack up to sixteen data-acquisition modules in a single unit — combining acquisition, recording, replay and transmission where other solutions need two or three separate boxes.

Built to fly, the NanoX works just as well on the ground: test benches, aircraft ground tests, propulsion stands and instrumented vehicles, where several units are placed next to the sensors on one time base and battery modules give an hour of autonomy each.

KEY SPECIFICATIONS
  • High-speed 1 Gbps recording & transmit
  • Up to 16 stackable acquisition modules
  • 64 GB – 2 TB recording (SSD cartridge)
  • Real-time streaming: D.T.MUX / IRIG 106 Ch.10 / IENA
  • Patented Xchange® module technology
  • Record, replay & TX module options (5–20 W, S/L/C-band)
  • Master/slave Ethernet / Wi-Fi architecture
  • Qualified DO-160 Rev G · MIL-STD-810G · MIL-STD-461G
  • MICRO D (MIL-DTL-83513) · IRIG 106 Ch.10 compliant

Manuals, returns and product notices: Support & documentation → · Compare the recorders →

Compatible software D.T.MUX Viewer Replay, decode & visualize your recordings

MAIN ADVANTAGES

  • Lightweight unit with a very small footprint
  • Fully flexible acquisition-module and chassis dimensions
  • High-speed recording system (1 Gbps)
  • High capacity — up to 2 TB
  • Real-time data streaming in D.T.MUX, IRIG 106 Chapter 10 and IENA formats
  • Patented Xchange® module technology
  • Record and replay in the same unit
  • Optional transmitter (TX) module — 5–20 W in S, L or C-band
  • Master / slave Ethernet / Wi-Fi architecture
  • Qualified to RTCA DO-160G and MIL-STD-810G (EMC: MIL-STD-461G)
  • SSD cartridge security options: AES-256 encryption, quick erase, auto-destruction
  • Battery module option — 1 h autonomy each, stackable up to 3
  • Integrated 90° rotation support

Xchange® module technology

Xchange® is ETEP's patented module technology, developed hand-in-hand with end users to give the NanoX maximum flexibility and room to grow. Every acquisition module clips into its own frame receiver and can be added, removed or swapped anywhere in the stack — up to sixteen frames interconnect through a linear backplane connector. The result is a unit you reconfigure like a set of building blocks: mix controller and acquisition modules freely, and when a module needs attention, identify and replace just that one in seconds — keeping maintenance fast and cost low.

One module slides out through the front panel, then the stack opens frame by frame: every module has its own frame and is replaced without touching the others.

Qualified to DO-160G & MIL-STD-810G

DO-160G MIL-STD-810G MIL-STD-461G
Temperature
-40 … +71 °C
Altitude
60 000 ft
Vibration
2.97 g RMS (5 Hz–2 kHz)
Shock
100 g / 11 ms
Acceleration
15 g
MTBF
> 30 000 h
Power
28 Vdc (16–36 V) · 12–130 W
Power ride-through
Ultra-capacitor
Cooling
Passive (COOL-NX option)
Weight
≈ 1.8–3.4 kg
Connectors
Micro-D (MIL-DTL-83513)

// CONFIGURATOR

Build your NanoX, module by module.

The NanoX is fully modular: a power-supply module, the controller of your choice and up to sixteen stackable acquisition modules. Assemble your unit below and send the configuration to our team for a quote.

POWER SUPPLY
POWER-NX Always included

Included in every unit — smart power supply, up to 130 W for 16 modules, MIL-STD-704F, ultra-capacitor ride-through.

SSD CARTRIDGE

Available with recording controllers (CPU-NR / NRT / NRTE).

CONTROLLER MODULE
ACQUISITION MODULES 0 / 16
Analog / sensors
Digital / buses & video

No modules yet — pick one above to start your stack.

(indicative, CPU options excluded)

OPTIONS
BAT70W/H-NX

Backup battery modules — 1 h of autonomy each, stackable up to 3 (+80 mm each).

⚠ Laboratory applications only — not for airborne use.

COOL-NX

Boosted cooling — required with video modules, recommended beyond 6 modules or with excitation voltages.

Each COOL-NX takes one of the 16 module slots, against the module that heats the most.

YOUR CONFIGURATION

Request a quote for this configuration  →